Hydrojetting,  also known as water jetting,  is the process of using high and ultra-high pressure water to clean open and enclosed areas (even areas that are difficult to access), surface prepare materials for coatings, remove clogs and cold-cut materials.

 Using water pressure from 5,000 psi to 35,000 psi, these techniques have been used in practically every industry where cleaning and descaling is required.

Benefits

Most of our completed works are evaluated and approved by paint manufacturers and appointed third party surveyors

We offer packaged services which includes qualified hydro-blasters, pump operators and  pumps from 8,000 psi to 35,000 psi capabilities.

We also provide internal pipe cleaning up to outside diameter of up to 36 inches. Self propelling nozzles are used wherever possible, thereby providing higher productivity and assess to longer lengths and smaller diameters.

Pump Rentals

Pump rentals that  are limited to users who are familiar with the process. Pumps are tested before delivery and shall be accompanied by our regular operators during the period of rental.

Lancing

High pressure water lancing is used to clear choked and clog pipes which otherwise had to be replaced or plugged. Internal of pipes and areas with difficult access can be cleaned and cleared by lancing with pressure up to 35,000 psi (depending on the pipes).

Cold Cutting

Cold cutting of metal is used in cases where avoidance of flammable techniques are required.